Complete Guide for Canon TS3322 setup | Wireless setup

The latest printer series from canon comes with a myriad of new and interesting features. If you have just purchased this amazing device, then we can help you with the canon ts3322 setup so that you can access these features.
The best thing about getting a printer with a wireless connection is that users can access them via computers, mobiles, or tablets while being far away from the actual device. It also helps in cutting out the additional hassle of connecting wires.

canon ts3322 setup
Steps for canon ts3322 setup-

The entire canon ts3322 setup can be broken down into a few different process, we have listed all of them below:

Unboxing

  • For a new printer, start by laying it down on a flat surface and removing all the packaging tapes and covers.
  • You should also take out all the manuals, complimentary ink, and connection cords, etc. that come with the canon ts3322 setup.
  • Insert the ink cartridges in the slot that opens on the side of the printer.
  • The paper tray should also be loaded with high-quality printer paper that is compatible with the machine.
  • Lastly, plug the power outlet into the socket and turn it on.

canon ts3322 setup

Pre-requisites

Before you begin with the canon ts3322 setup process, here are a few things that should be kept in mind.
Make sure that the printer you are getting is compatible with the current version of your operating system.
The user should have a stable and working internet connection. Keep the router and printer in close proximity to each other for the entirety of the setup process.

Connect network with Canon ts3322 setup

  • You will have to begin by locating the WPS on the outside panel of the printer.
  • Press the button down for a couple of seconds.
  • Release the button when a white light begins to flash and changes its color to a blue hue.
  • The change of light indicates that the device is in setup mode.
  • Scan for nearby Wi-Fi connections and click on the one that you will be using.
  • Type in the password and SSID etc. and hit enter.
  • Once the light stabilizes, it is an indication that the network has been connected.

Installation

canon ts3322 setup

After you have downloaded the driver, connect the Canon ts3322 setup and the computer with a data cord. Turn on both the devices and double-click on the downloaded file to start with the installation. Open the printer and devices option from the start menu.

You will then be displayed a list of devices available for connection, choose the one you are using. If it is not mentioned on the list then add it by typing in the name and model number of the printer you are about to connect.

You will see an instructions wizard displayed on the screen; follow those to complete the canon ts3322 setup process.
The users will also be required to restart the computer once to save all the changes made. If you want to skip using the USB cables, then this process can also be done by using the Wi-Fi connection. Just make sure to connect both devices beforehand.

Canon ts3322 wireless setup

canon ts3322 setup

Canon is widely known for its optics and printing product. Its products are widely accepted and used and the most used product is their printers. Canon is a Japanese-based company that is famous for its high-quality printing products, inkjet, LaserJet, all in one printer and they can be setup up through Wi-Fi or wireless and can be connected to a computer, mac, or androids, etc.

TS3322 is an inkjet All-in-one printer that is capable of printing as well as scanning. It has two cartridges which makes printing easy and effective with its Mopria print service it is easy to print through smartphones, tablets and with the Air print service it is easy to print through iPhone, iOS, Mac, etc.

Here we will talk about wireless connection of Canon ts3322 setup.

  • First, make sure you clean all the unwanted packing and plastics from the canon ts3322 setup and remove the orange tap.
  • Then check that your wireless router is present and completely set up in your printer.
  • Check that your computer is connected to a high and fast network.
  • Now connect the printer to the power switch. Switch on the power button you will see a zero reading on the screen.
  • Now open the printer lid and put the ink cartridge inside the given area.
  • Fix the paper carefully on the paper tray.
  • Now go to http//ij canon.com.
  • Click on the setup option.
  • Select your country or region on the window.
  • Enter your printer model number in the search area.
  • Select your printer model and select the window as an operating device.
  • Click on setup and click the download option
  • Your printer driver will start downloading.
  • Open your downloaded drive.
  • Accept the license agreement.
  • Agree on the terms and conditions.
  • Now on the next window select the connection method – Wi-Fi connection.
  • Click next. Then check your printer is on or not.
  • The system will start searching for the printer on your network.
  • The window will notify you that it is a wireless network.
  • Click next.
  • Enter your Wi-Fi password on the next window.
  • It will start setting up and will take some time.
  • Click next when the connection is completed.
  • Then it will start downloading and installing the drive on the computer.
  • And it will register your computer to the network.
  • It will take some time so make sure you have a high internet connection.
  • Now your Canon ts3322 setup is complete.
  • The window will show you a screen with a test print option.
  • If you want to test the printer go for it.
  • Now click continue and finish your canon ts3322 setup process.

You can access your canon print application in your system. Go to the start button and scroll down till you find canon icon.

You can also scan your file through the ts3322 printer as it is an all-in-one printer. Always make sure you have a fast and strong internet connection as well as a continuous power supply, otherwise, the process will be slow or will stop in between.

If you face any problem with the canon ts3322 wireless setup then call the technical team for help.

Canon ts3322 connect to wifi

Canon ts3322 connect to wifi

The ts3322 is a good choice for your personal and moderate professional needs. If you have recently purchased this device, then continue reading on below to find out all about the canon ts3322 connect to wifi process.

In this article, we have listed a complete guide that will help you with the entire setup process of a new printing machine along with the details to reach customer care.

Prerequisites

Before you go ahead with the setup process, keep these things in mind:

  • Details such as the password, SSID, network code, etc. should be noted down from the base of the router.
  • The printer and the router should be kept in close proximity to each other.
  • Connect the device with a PC using a cable and make sure that the computer is hooked up to the same network as the printer will be.

Steps

  1. Unbox and Connect
  • Take the printer out from its box and remove the foam boards, unwrap the additional plastic packaging.
  • The box will also contain some other equipment such as a starter ink cartridge, a cd driver, wires, and cables for attaching the device.
  • Use the provided ink cartridges by opening the front flap and placing them in the designated slots.
  • The paper tray should be filled with at least 20 high-quality printer sheets.
  1. WPS
  • Once the external hardware has been attached, you can begin the canon ts3322 connect to wifi The wireless button on the control panel needs to be pressed and held down for a couple of seconds.
  • Then proceed to press and hold the access point or WPS.
  • Both of these buttons have a led lamp beside them; they should both start flashing a blue light each.
  • These blinking lights are a clear indication of the fact that the printer has entered into setup mode and the user can begin connecting.
  1. Install
  • For the actual wifi connection, open the search browser on your PC.
  • Look up the address of the printer’s official website, enter the model name on the homepage search bar on the top right.
  • Choose the driver that would be compatible with the printer as well as the operating system.
  • Download it by double-clicking on the link.
  • Extract files and click on install.
  • Click on add printer under the settings and choose the one attached to it.
  • Scan the area for wifi networks and click on the one that is close to the device.
  • If you cannot find the name of the network, it can also be entered manually. Enter the password and click next.
  • Check if the blinking lights have stabilized or not – an indication of connected wifi.
  • Continue the rest of the installation process according to the instructions provided on the desktop wizard.

If the user has any issues with the canon ts3322 connect to wifi process, then they can contact the customer service team with their query or feedback on the official support website. They can also contact the virtual assistant or talk to a live agent

Canon ts3322 printer connect to smartphone

Here are the few steps for canon ts3322 setup to the smartphone.

canon pixma mg3620 wireless setup

  • Remove all the orange tap and protective covering from the printer.
  • Connect the printer to the switch via cable, put one end of the cable to the printer and the other to the switchboard.
  • Switch on the power switch.
  • Press the power button on the printer and switch on the printer.
  • You will see a zero reading on the screen just below the wireless button.
  • Now go to the wireless section and press the smartphone button for 3 seconds.
  • You will see the screen will show you a Wi-Fi icon and a flashing line it means it has reached setup mode.
  • Now open your smartphone and download the Canon print application from the play store.
  • Now open your Wi-Fi setting and enable it and connect your phone to the printer network that must be starting from canonij…..
  • Then open your Canon print application.
  • Click ok when it asks to search for an available printer for your device.
  • Now select the wireless router available to you.
  • Enter the password and click ok.
  • Now it will ask you – Do you want to connect your smartphone with the same wireless router as a printer.
  • Click yes.
  • It will take some time to connect your smartphone and your printer with the same network.
  • When the connection is completed it will tell you that you are all set and select a photo to try.
  • If you want to check the working of the printer click the select image option and select the photo you want to print and allow printing.
  • If the print comes out successfully it means your connection is perfectly set up.
  • If you want to skip this step click the cancel button.
  • You will see your printer name on the application screen.
  • This is how you connect your Canon ts3322 setup to the smartphone.

Steps for Canon ts3322 setup on mac.

Canon TS3322 setup

  • Remove all the orange tap and wrapping from the printer.
  • Check that you are connected to a high and fast network.
  • Now connect the Canon ts3322 setup to the power switch. Switch on the power button you will see a zero reading on the screen.
  • Now open the printer lid and put the ink cartridge inside the given area.
  • Fix the paper carefully on the paper tray.
  • Now go to http//ij canon.com.
  • Click on the setup option.
  • Enter your printer model number in the search area.
  • Select your printer model and select Mac as an operating device.
  • Click on setup and click the download option
  • Your printer driver will start downloading.
  • Open your downloaded drive.
  • An introduction window will open up.
  • Click continue.
  • A password window will open. Enter your Mac user name and password. Click ok. This is done for security purposes.
  • On the newt window, Accept the license agreement.
  • Agree on the terms and conditions.
  • Now on the next window select the connection method – Wi-Fi connection.
  • Click next. Then check your printer is on or not.
  • The system will start searching for the printer on your network.
  • The window will notify you that it is a wireless network.
  • Click next.
  • Enter your Wi-Fi password on the next window.
  • It will start setting up and will take some time.
  • Click next when the connection is completed.
  • Then it will start downloading and installing the drive on the mac.
  • And it will register your mac to the network.
  • It will take some time so make sure you have a high internet connection.
  • Now your Canon ts3322 setup on mac is complete.
  • The window will show you a screen with a test print option.
  • If you want to test the printer go for it.

The setup process of canon ts3322 for wireless and for mac are almost the same, the few extra steps to choose mac as an operating device and going through a security check.

You can also scan your file through ts3322 printer as it is an all-in-one printer. Always make sure you have a fast and strong internet connection as well as a continuous power supply, otherwise, the process will be slow or will stop in between.

If you face any problem with the Canon ts3322 setup on mac then call the technical team for help or you can send an email to the canon.

Related Articles-

2 thoughts on “Complete Guide for Canon TS3322 setup | Wireless setup”

Leave a Comment

Call Us